CNC machines programming – is a method used for generation of software instructions for managing machines, units, mechanisms. As a result, the correctly adjusted and algorithmized equipment allows to automate the production process and to ensure higher flexibility of the company for industrial requirements and tasks. GFE-Solutions’ specialists provide algorithmization services for the operation of CNC machines of any type using profile software remotely for industrial enterprises throughout Europe.

During operation and preparation of new algorithms, GFE-Solutions’ specialists are guided by advanced technical documentation of the industrial company, as well as reasonable quality standards in the customer’s industry that allows finding an optimal economic, technical and operational solution. Within the framework of cooperation, we can send both an outstaffed employee and a complete team of software engineers with conduct visit to the customer’s for expert evaluation, ensuring the complex approach and total immersion into specific nature of the industrial company’s operational processes. Except for CNC machines programming, we provide the full scope of engineering services.

GFE-Solutions’ specialists will develop and introduce technical solutions in design engineering, due to which it will be possible to transfer complex processes to outsource fully or partially for urgent and successful completion of industrial projects. Our experts are ready to perform a set of works in parts manufacturing:

  • Develop the competent concept of missing elements;
  • Select equipment for manufacturing the part;
  • Design equipment for production of specific components;
  • Make a quality control map when producing parts of new format;
  • Conduct start, testing and support of the production process for new parts manufacturing.

Get acquainted with the results of intellectual programming of production by our specialists right now, and make sure that cooperation with GFE-Solutions is reliable!

Our design engineers will perform the development and introduction of the mechanical treatment technology in strict accordance with the route map under modern standards:

01.

  • Development of the operational technological process of turning, drilling and milling of parts with calculation of modes and time modes.

02.

  • Selection of equipment and tools (cutting, auxiliary), mounting (fastening fixtures) with recommendations for the most beneficial and reliable suppliers.
  • Selection of the optimal CAD/CAM system for automated designing of management programs (MP) on a personal computer with recommendations for the most beneficial and reliable suppliers.

03.

  • Design engineers’ training in designing 3d models of treated parts in CAD systems with recommendations for computer equipment selection.
  • Software engineers’ training in designing management programs in the CAM system using 3d models with recommendations for computer equipment selection.

04.

  • Writing post-processes and preparation of recommendations for operation of post-processes.
  • Development of management programs for your parts.

05.

  • Selection of monitoring and visualization process for treatment, elimination of possible collisions of actuating elements of the machine with installed devices and the part

06.

  • Adjustment of the machine: installation, alignment and fastening of the part; download of the MP into the CNC system; preparation and toolsetting of the tool; download of the machine automatic tool matrix with the tool; setting of system of coordinates of the part and CNC machine system etc., including training of servicemen and operators of all processes.
  • Check of quality of finished parts.

Benefits for business in cooperation with GFE-Solutions:

GFE-Solutions’ specialists have a considerable expert evaluation potential and experience in some industrial niches up to 15 years that guarantees high precision and reliability in operation with profile equipment and fittings. Besides, due to the process with GFE-Solutions, the business gets:

GFE-Solutions’ specialists have experience and skills of using any CAD/CAM software: Autodesk HSM, Autodesk Inventor, Fusion 360, Solid Works, Solid CAM, Siemens NX. Involvement of such a subcontractor with a full staff of experts and opportunities of remote integration with the customer’s SW releases the company from hiring and onboarding of staff with all resulting expenses.

Owing to the involvement of an outsourcing company with the establishment of deadlines, a business can concentrate resources and make time for settlement of strategic tasks.

GFE-Solutions’ specialists always analyze of certainty of equipment adjustment algorithms using checked testing models that provide maximum conformity of the indices to the scheduled ones while handing over programs and detail design to the customer.

At that, when selecting the outsourcing company GFE-Solutions for CNC machines programming, you choose engineers with the international experience at the accessible prices for services. Ukrainian experts are included in TOP-100 of sought-after specialists all over the world: due to high competence and universality and price orientation.

We are immediately ready to confirm the established quality and reliability standard. Contact our specialist to transfer necessary information in any suitable format (DXF, STEP, IGS and others), and we will quickly provide you with a commercial offer for the price and realization terms. 

Discover Our Services

Operacje techniczne

Technologie produkcji

Programowanie CNC

Obliczenia wytrzymałościowe

Programowanie PLC

Wsparcie inżynierii projektowej

Kontakt

Tell us about your project

Siedziba główna

30, Estrady,Warsaw, Poland 01-932
Phone: +48 798 763 604
W sprawach ogólnych: info@gfe-solutions.com
W sprawach handlowych: inquiry@gfe-solutions.com

Biuro operacyjne

201/203, Kharkivske shose, Kijów, Ukraina 02121
Email: info@gfe-solutions.com
Phone: +38 098 237 0047

Nasza firma produkuje elementy spawane o znaczeniu dla bezpieczeństwa, przeznaczone dla przemysłu chemicznego i farmaceutycznego.

W związku z tym, że coraz trudniej jest nam znaleźć dobrych inżynierów i projektantów do naszego działu projektowego w naszej siedzibie położonej na terenach wiejskich w regionie Münsterland, pod koniec 2018 roku postanowiliśmy poszukać nowych rozwiązań zewnętrznych na rynku usług.

 

Christian Menke

Dyrektor generalny firmy V. KRANZ GmbH, Dülmen

Bardzo cenię sobie elastyczność i otwartość firmy GFE na nowe wyzwania. Nie boją się oni wyruszyć w nową podróż.
Kiedy zastanawiam się nad zewnętrznymi uwarunkowaniami projektu, który wspólnie rozpoczęliśmy, doszliśmy do etapu, na którym osiągnęliśmy postępy i wyniki, których osobiście się nie spodziewałem.

Daniel Ilge

Dyrektor ds. technologii i zarządzania produktami w firmie WALDRICH COBURG GmbH

Potrzebowaliśmy dodatkowych zasobów i profesjonalnego wsparcia dla naszego zespołu badawczo-rozwojowego, zwłaszcza w związku z pracami nad nowym produktem.

Ponadto firma GFE Solutions zapewniakompetentne wsparcie ze strony doskonale wykształconych inżynierów. Wysoki poziom profesjonalizmu. Terminowość realizacji zleceń i doskonała komunikacja (osoby posługujące się językiem niemieckim jako językiem ojczystym).

Frank Pfister

Dyrektor generalny firmy CVS engineering GmbH

Jesteśmy firmą, która nieustannie poszukuje zakładów do celów badawczych lub realizacji projektów pilotażowych naszych klientów. W ubiegłym roku pracowaliśmy nad zleceniem z dziedziny technologii medycznych, które udało nam się zrealizować, między innymi dzięki wysiłkom zespołu GFE Solutions.

Dr. Thomas Bauer

Dyrektor operacyjny i członek zarządu spółki DIENES Apparatebau GmbH

Potrzebowaliśmy wsparcia w zakresie zasobów naszego działu projektowego i musieliśmy działać szybko – nie dysponowaliśmy zasobami wewnętrznymi, a firma GFE była w stanie udzielić nam szybkiej i kompetentnej pomocy. GFE z pełnym zaangażowaniem dostosowuje się do konkretnych potrzeb swoich klientów, dysponuje szerokim gronem specjalistów i zaproponowała uczciwą cenę opartą na przejrzystych zasadach.

Sebastian Schuelke

Dyrektor zarządzający w firmie SICON GmbH

Szukaliśmy dodatkowych inżynierów, aby zwiększyć nasze możliwości budowlane. Wydawało mi się, że jesteście młodym, zmotywowanym zespołem, a oprócz waszej wiedzy fachowej to właśnie wasze osobiste zaangażowanie utwierdziło mnie w przekonaniu, że warto z wami współpracować. Współpraca od samego początku przebiegała bez zakłóceń i była bardzo owocna. Jesteśmy zadowoleni z wyników.

Lukas Jochimek

Kierownik techniczny w firmie Schauenburg Maschinen- und Anlagen-Bau GmbH

pl_PL